NSN 6105-00-548-1598 · NIIN 005481598 · FSC 6105
NO DASHES 6105005481598
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.0937 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.1875 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.1666 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.6250 |
| AAJV | OVERALL WIDTH | INCHES 8.125 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 4.750 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| AAJT | OVERALL HEIGHT | INCHES 7.750 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---2511 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 60.0 AND OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1800.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 6.750 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 1.600 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.250 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.125 |
| AAJU | OVERALL LENGTH | INCHES 12.750 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12152 | 20019 |
| 19639EITEM31 | 63743 |
| 104955-1 | 63743 |
| 19625APC77SH1 | 63743 |
| 22481BREV0PC6 | 63743 |
| 104-955EPC104-955-1 | 63743 |
| 6307-3251505REVDPC6 | 80064 |
| 3002023ALT1PC77 | 80064 |
| 563-4105-1013367ALT5ITEM31 | 80064 |
| 6301-3109642 | 80064 |
| MIL-M-17556 | 81349 |