NSN 6105-00-548-2142 · NIIN 005482142 · FSC 6105
NO DASHES 6105005482142
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 56.300 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| AAJU | OVERALL LENGTH | INCHES 46.813 |
| AAJV | OVERALL WIDTH | INCHES 22.500 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 10.750 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 18.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 AND OPERATING CELSIUS 40.0 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 440.0 |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 15.0000 |
| AAJT | OVERALL HEIGHT | INCHES 24.875 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 2.1875 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 6 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.250 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 30.0 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 475-2000-519204PC1T091 | 80064 |
| MIL-M-17413 | 81349 |
| 37953PC1T091 | 08219 |
| 37953 | 08219 |