NSN 6105-00-548-2255 · NIIN 005482255 · FSC 6105
NO DASHES 6105005482255
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
| AAJT | OVERALL HEIGHT | INCHES 16.562 |
| AAJU | OVERALL LENGTH | INCHES 25.812 |
| AAJV | OVERALL WIDTH | INCHES 15.250 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.3750 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.1875 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.6245 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.938 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 10.500 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL---1940 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1745.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 12.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 8.000 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 17.5000 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 55J752SUB2PC1T02 | 79500 |
| 6301-3102296PC1T | 80064 |
| MILM1940AMEND1SERVICEA | 81349 |