NSN 6105-00-606-6456 · NIIN 006066456 · FSC 6105
NO DASHES 6105006066456
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FAAZ | PHASE | INPUT SINGLE |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.050 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.190 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 1.563 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 0.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 1.678 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 1.200 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 3 |
| AGRB | FLAT DEPTH | SECOND END INCHES NOMINAL 0.138 |
| FEAT | SPECIAL FEATURES | 0.096 IN. DIA HOLE ON SHAFT FIRST END |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AKCT | SHAFT ROTATION DIRECTION | SECOND END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES NOMINAL 0.312 |
| ABXQ | FLATTED PORTION LENGTH | SECOND END INCHES NOMINAL 0.375 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.250 |
| CWDY | TEMP RATING | OPERATING CELSIUS 0.0 AND OPERATING CELSIUS 40.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3600.0 |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.625 |
| AAJT | OVERALL HEIGHT | INCHES 3.313 |
| AAJU | OVERALL LENGTH | INCHES 7.313 |
| AAJV | OVERALL WIDTH | INCHES 3.313 |
| AASA | THREAD LENGTH | FIRST END INCHES MINIMUM 0.375 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNF |
Cross-references
11 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SMD71714ANDSMC171585 | 80063 |
| SCC622543G | 80063 |
| SCC729922GP1 | 80063 |
| SBCE2922-11N | 81041 |
| 53502 | 82423 |
| 56871 | 82423 |
| 56871A | 82423 |
| 68114A | 82423 |
| 53502A | 82423 |
| DWG53502A | 82823 |
| 5257 | 13685 |
Supersedes
This item replaces cancelled NIIN 003309748. An older drawing citing one of those numbers resolves here.