NSN 6105-00-614-4026 · NIIN 006144026 · FSC 6105
NO DASHES 6105006144026
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| FAAZ | PHASE | INPUT SINGLE |
| AAUB | HOLE DIAMETER | SINGLE END INCHES NOMINAL 0.0760 |
| AAZQ | HOLE DEPTH | SINGLE END INCHES NOMINAL 0.2500 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.2500 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 3.5 AND INCH-OUNCES STALLED 1.0 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.750 |
| CWDY | TEMP RATING | OPERATING CELSIUS -18.0 AND OPERATING CELSIUS 60.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.500 |
| AAJU | OVERALL LENGTH | INCHES 3.766 |
| AAJV | OVERALL WIDTH | INCHES 2.000 |
| AJWZ | HOLE CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.0940 |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5 EXCEPT ADDITIONAL FLAT LOCATED AT 90 DGREEES. SAME DIMENSIONS |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| AAJT | OVERALL HEIGHT | INCHES 2.000 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.5620 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0100 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 7600.0 AND SINGLE FULL LOAD 7000.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.440 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-PERMANENT SPLIT CAPACITOR SPLIT PHASE |
| AXGY | MOUNTING METHOD | END BELL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 3 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A5 AND SECOND STYLE A13 |