NSN 6105-00-635-1031 · NIIN 006351031 · FSC 6105
NO DASHES 6105006351031
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FAAZ | PHASE | INPUT THREE |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| AAJV | OVERALL WIDTH | INCHES 26.125 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.6250 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.8750 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1750.0 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 1.000 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CMLP | THREAD QUANTITY PER INCH | 8 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 50.0000 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 3.625 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 11.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 16.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 AND AMBIENT CELSIUS 50.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAJT | OVERALL HEIGHT | INCHES 23.625 |
| AAJU | OVERALL LENGTH | INCHES 34.750 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A13 AND THIRD STYLE A9 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 18.000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILM17060SERVICEA | 81349 |
| 611126 | 08219 |