NSN 6105-00-635-6107 · NIIN 006356107 · FSC 6105
NO DASHES 6105006356107
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BFLT | TIME INTERVAL | HOURS MAXIMUM ON 1.0 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 75.0000 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 2.1250 |
| AAJU | OVERALL LENGTH | INCHES 44.625 |
| AAJV | OVERALL WIDTH | INCHES 25.500 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.5000 |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 18.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.2500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 16.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 40.0 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT THREE |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1760.0 |
| AAJT | OVERALL HEIGHT | INCHES 26.125 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.625 |
| AKPS | DUTY CYCLE | INTERMITTENT |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-17060A |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-15 DEG |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 11.000 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| MILM17060SERVICEA | 81349 |
| 611129 | 08219 |