NSN 6105-00-655-3083 · NIIN 006553083 · FSC 6105
NO DASHES 6105006553083
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
21 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FAAZ | PHASE | INPUT SINGLE |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 12000.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.850 |
| AAJT | OVERALL HEIGHT | INCHES 2.180 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.631 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FACE |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 71.0 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 1.0 AND MINUTES MINIMUM OFF 10.0 |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 50000.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| BTBY | SHAFT END STYLE | |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.8000 |
| AFHR | ACCESSORY COMPONENTS | GEAR-SPUR |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1580 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED STUD(S) 2 |
| AAJU | OVERALL LENGTH | INCHES 4.951 |
| AAJV | OVERALL WIDTH | INCHES 1.660 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 005478786. An older drawing citing one of those numbers resolves here.