NSN 6105-00-683-0454 · NIIN 006830454 · FSC 6105
NO DASHES 6105006830454
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0620 |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.3120 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| CWDY | TEMP RATING | OPERATING CELSIUS -40.0 AND OPERATING CELSIUS 55.0 AND AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3600.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.625 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.700 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A6 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A6,EXCEPT ADDITIONAL FLAT AT 90 DEGREES,SAME DIM. |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 8 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0833 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AAJT | OVERALL HEIGHT | INCHES 3.500 |
| AAJU | OVERALL LENGTH | INCHES 6.874 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | FAN COOLED |
| BFMQ | FLAT CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 1.1880 |
| AAJV | OVERALL WIDTH | INCHES 3.438 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.3120 |
| BKPB | CURRENT RATING METHOD | LOAD |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.375 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.687 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.250 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 001231951. An older drawing citing one of those numbers resolves here.