NSN 6105-00-686-4124 · NIIN 006864124 · FSC 6105
NO DASHES 6105006864124
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.2494 AND INCHES MAXIMUM 0.2479 |
| CWDY | TEMP RATING | OPERATING CELSIUS 55.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 2500.0 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0250 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| FAAZ | PHASE | INPUT THREE |
| AAJU | OVERALL LENGTH | INCHES 3.075 |
| AAJV | OVERALL WIDTH | INCHES 2.250 |
| AXCP | WINDING TYPE | INDUCTION-WOUND ROTOR |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.438 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| BFLT | TIME INTERVAL | MINUTES MAXIMUM ON 2.0 AND MINUTES MINIMUM OFF 10.0 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 0.800 |
| AKPS | DUTY CYCLE | INTERMITTENT |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 1787950 | 53711 |
| A15C4 | 88818 |
| BUWEPSDWG1787950 | 95310 |
| 063-100-001PC16 | 98853 |
| 138C002 | 98853 |
| E3AGP-6B | 19070 |
Supersedes
This item replaces cancelled NIIN 009567703. An older drawing citing one of those numbers resolves here.