NSN 6105-00-754-7662 · NIIN 007547662 · FSC 6105
NO DASHES 6105007547662
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
27 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A31 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.499 AND INCHES MAXIMUM 0.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 1.093 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 2.031 |
| AAJV | OVERALL WIDTH | INCHES 4.375 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 2.375 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.028 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | INDUCTION-SPLIT PHASE |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND HORIZONTAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.125 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.810 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 8 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.375 |
| FEAT | SPECIAL FEATURES | 4 THD MOUNTING HOLES ON TOP; 4 THD MOUNTING HOLES ON BOTTOM |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| AAJU | OVERALL LENGTH | INCHES 6.810 |
| FAAZ | PHASE | INPUT SINGLE |
| AAJT | OVERALL HEIGHT | INCHES 4.062 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1740.0 |