NSN 6105-00-821-5776 · NIIN 008215776 · FSC 6105
NO DASHES 6105008215776
In Stock
MOTOR-TACHOMETER GENERATOR
Motors, Electrical
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| BKPC | CALIBRATION VOLTAGE OUTPUT TYPE IN VOLTS | AC 0.5 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1250 |
| AAJU | OVERALL LENGTH | INCHES 2.263 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 10 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 6000.0 |
| ACDC | CURRENT TYPE | INPUT AC |
| FAAZ | PHASE | INPUT SINGLE |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| AAJV | OVERALL WIDTH | INCHES 1.065 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| AYHE | EXCITOR TYPE | SEPARATELY EXCITED |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES STALLED 0.6 |
| BKPS | CONTROL FIELD VOLTAGE TYPE AND RATING IN VOLTS | AC 67.5 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.358 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 125.0 |
| AXGY | MOUNTING METHOD | CLAMP RING(S) |
| BFLQ | CALIBRATION SPEED IN RPM | 1000.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 0.3580 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| ST11051 | 19333 |
| 1297-1 | 19710 |
| IGB-001 | 40968 |
| 511097-1 | 64547 |
| CR40809049 | 05088 |
| 11MG-503-C/100-N-14A | 06989 |
| SJ11F32 | 19070 |
Supersedes
This item replaces cancelled NIIN 008205559. An older drawing citing one of those numbers resolves here.