NSN 6105-00-909-8189 · NIIN 009098189 · FSC 6105
NO DASHES 6105009098189
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AXGY | MOUNTING METHOD | PAD |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 80.0 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 3.594 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CBBL | FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CMLP | THREAD QUANTITY PER INCH | 24 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.6000 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AAJT | OVERALL HEIGHT | INCHES 4.250 |
| AAJU | OVERALL LENGTH | INCHES 7.594 |
| BFMF | COOLING METHOD | SELF-VENTILATED |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.2500 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.0940 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.0470 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.3750 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 0.7500 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNS |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.062 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 55.0 |
| AAJV | OVERALL WIDTH | INCHES 4.250 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 4000.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 3.594 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 |
| AXCP | WINDING TYPE | SHUNT WOUND |