NSN 6105-00-921-5194 · NIIN 009215194 · FSC 6105
NO DASHES 6105009215194
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.140 |
| AXFH | SPLINE LENGTH | SINGLE END INCHES NOMINAL 1.140 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.525 |
| SPCL | SPECIAL TEST FEATURES | ITEMS ARE BEING CODED AS CRITICAL TO INSURE SOURCE INSPECTION WILL BE PERFORMED AT THE POINT OF MANUFACTURE, PRIOR TO MATERIAL RECEIPT BY THE US NAVY OR OTHER DOD COMPONENTS. THESE ITEMS ARE PIECE PARTS OR END ITEMS IN SUPPORT OF VITAL MILITARY HARDWARE NECESSARY TO SUSTAIN THE SUCCESSFUL MISSION OF THE SHIPS, SUBMARINES, AND SHORE STATIONS OF THE US NAVY. CRITICAL FEATURES INCLUDING, BUT NOT LIMITED TO, DIMENSIONS, TOLERANCES/CLEARANCES, ELECTRONIC CHARACTERISTICS, AND METALLURGICAL PROPERTIES WILL BESPECIFIED FOR GOVERNMENT Q AR (QUALITY ASSURANCE REPRESENTATIVES) TO INSURE THE HIGHEST POSSIBLE DEGREE OF QUALITY AND RELIABILITY OF THESE PARTS BEING DELIVERED UNDER NAVICP CONTRACTS |
| AAJU | OVERALL LENGTH | INCHES 7.760 |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXCP | WINDING TYPE | SHUNT WOUND |
| BKPH | TORQUE RATING AND TYPE | INCH-POUNDS STARTING 50.0 |
| CNXS | POWER RATING | INPUT HORSEPOWER 3.000 |
| CRTL | CRITICALITY CODE JUSTIFICATION | SPCL |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | INTERMITTENT |
| ANPZ | ENCLOSURE FEATURE | GENERAL PURPOSE |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 950.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE SINGLE 28.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A14 |
| ABSA | SPLINE QUANTITY | 11 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.375 |
| AAUH | SPLINE MINOR DIAMETER | SINGLE END INCHES NOMINAL 0.2513 |
| BFLT | TIME INTERVAL | SECONDS MAXIMUM ON 45.0 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| AAJT | OVERALL HEIGHT | INCHES 3.050 |
| FEAT | SPECIAL FEATURES | SHAFT MATERIAL IS STEEL,QQ-S-624,COMP 4130,THRU HARDENED SPLINE END OF SHAFT TO ROCKWELL C45-48,REST OF SHAFTTO BE ROCKWELL C30-33; PITCH=32/64 IN.; PITCH DIA.=0.3438 IN.; PRESSURE ANGLE=30 DEG.; TOOTH THK.=0.0479 IN.; BASEDIA.=0.2977 IN.; MEASURING PIN DIA.=0.060 IN.; MIN. MEASUREMENT OVER 2 PINS=0.4279 IN.; LG. OF ENGAGEMENT=0.630 IN. |
| CWFX | ROTOR SPEED RATING IN RPM | HIGH FULL LOAD 6500.0 |
| AAJV | OVERALL WIDTH | INCHES 5.145 |
Cross-references
1 manufacturer part number on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 63D11138 | 18894 |