NSN 6105-00-921-7319 · NIIN 009217319 · FSC 6105
NO DASHES 6105009217319
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| FAAZ | PHASE | INPUT SINGLE |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0312 |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| AXCP | WINDING TYPE | INDUCTION-SPLIT PHASE |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 8 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 0.8120 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.0833 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.000 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CWFX | ROTOR SPEED RATING IN RPM | LOW FULL LOAD 1425.0 AND HIGH FULL LOAD 1725.0 |
| AAJV | OVERALL WIDTH | INCHES 3.860 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.125 |
| CWGL | CURRENT RATING IN AMPS | INPUT FIRST MULTIPLE 2.400 OR SECOND MULTIPLE 1.200 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL FIRST MULTIPLE 115.0 OR LINE TO NEUTRAL SECOND MULTIPLE 230.0 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| AAJT | OVERALL HEIGHT | INCHES 4.500 |
| AAJU | OVERALL LENGTH | INCHES 6.490 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 2.250 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.3125 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| AXGY | MOUNTING METHOD | RESILIENT CRADLE |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 2.312 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 001258141. An older drawing citing one of those numbers resolves here.