NSN 6105-00-928-7166 · NIIN 009287166 · FSC 6105
NO DASHES 6105009287166
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
| FAAZ | PHASE | INPUT THREE |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CNMK | WOODRUFF KEY SIZE DESIGNATION | 1 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.5000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.375 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.430 |
| CWDY | TEMP RATING | OPERATING FAHRENHEIT -65.0 AND OPERATING FAHRENHEIT 160.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 3.875 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3600.0 |
| FREQ | FREQUENCY IN HERTZ | 400.0 |
| AGQL | UNDERCUT LENGTH | SINGLE END INCHES NOMINAL 0.688 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AAJV | OVERALL WIDTH | INCHES 4.130 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.3750 |
| ABPA | UNDERCUT DIAMETER | SINGLE END INCHES NOMINAL 0.281 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | END BELL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 12 |
| BFMF | COOLING METHOD | AIR TO AIR COOLED |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | SINGLE END INCHES NOMINAL 0.6875 |
| AAJT | OVERALL HEIGHT | INCHES 4.130 |
| AAJU | OVERALL LENGTH | INCHES 5.650 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.100 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 208.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A28 AND THIRD STYLE A11 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.375 |