NSN 6105-00-958-6418 · NIIN 009586418 · FSC 6105
NO DASHES 6105009586418
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.620 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.3116 AND INCHES MAXIMUM 0.3120 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKAE | MAXIMUM OPERATING ALTITUDE RATING | FEET 12000.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 1.375 |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3350.0 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 1.750 |
| AAJU | OVERALL LENGTH | INCHES 5.430 |
| CWDY | TEMP RATING | OPERATING CELSIUS -54.0 AND OPERATING CELSIUS 62.0 AND AMBIENT CELSIUS 20.0 |
| AAJT | OVERALL HEIGHT | INCHES 3.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.100 |
| AAJV | OVERALL WIDTH | INCHES 4.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 115.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT SINGLE |
| FEAT | SPECIAL FEATURES | SHAFT END STYLE A5,EXCEPT ADDITIONAL FLAT AT 90 DEG,SAME DIM.; FOUR ADDITIONAL MOUNTING HOLES ON TOP |
| FREQ | FREQUENCY IN HERTZ | 50.0 OR 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 4 |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SINGLE VALUE CAPACITOR SPLIT PHASE |
| AXGY | MOUNTING METHOD | FIXED BASE AND FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 8 |
| BFMF | COOLING METHOD | NONVENTILATED |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0310 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 2.620 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 0.812 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 1.6200 |