NSN 6105-00-995-1208 · NIIN 009951208 · FSC 6105
NO DASHES 6105009951208
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AKPS | DUTY CYCLE | CONTINUOUS |
| CBBL | FEATURES PROVIDED | FRAME ELECTRICALLY GROUNDED AND HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 27.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A17 |
| AAJU | OVERALL LENGTH | INCHES 1.575 |
| AAJV | OVERALL WIDTH | INCHES 0.875 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1238 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BFMS | FULL TOOTH LENGTH | SINGLE END INCHES MINIMUM 0.150 |
| ANPZ | ENCLOSURE FEATURE | OPEN PROTECTED |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXGY | MOUNTING METHOD | FACE |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 15.0 AND INCH-OUNCES STALLED 3.0 |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
| AJLA | TEETH QUANTITY | 9 |
| AAJT | OVERALL HEIGHT | INCHES 0.875 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.200 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 0.660 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW NO LOAD 17000.0 AND HIGH NO LOAD 20000.0 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |