NSN 6105-01-035-2100 · NIIN 010352100 · FSC 6105
NO DASHES 6105010352100
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.750 |
| AAJU | OVERALL LENGTH | INCHES 11.687 |
| AAJV | OVERALL WIDTH | INCHES 9.250 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.187 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.093 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.875 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.250 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF-45 DEG |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| CNMM | FRAME SIZE DESIGNATION | 145T |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.5000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.312 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.000 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1730.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 5.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT LOW 2.860 OR HIGH 5.720 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 220.0 OR LINE TO NEUTRAL HIGH 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 9 |
Cross-references
7 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 715297-QA | 50380 |
| 2600786-016 | 47WD8 |
| 700968-56 | 50380 |
| P14X3238 | 50380 |
| 2600786-016 | 58568 |
| P14X3238 | 71956 |
| ECP3584T | 71956 |
Supersedes
This item replaces cancelled NIIN 011110010. An older drawing citing one of those numbers resolves here.