NSN 6105-01-091-3635 · NIIN 010913635 · FSC 6105
NO DASHES 6105010913635
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 8.500 |
| AAJU | OVERALL LENGTH | INCHES 11.125 |
| AAJV | OVERALL WIDTH | INCHES 9.750 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.1855 AND INCHES MAXIMUM 0.1875 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.1182 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.7495 AND INCHES MAXIMUM 0.7500 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 1.5000 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.7500 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0481 |
| ANPZ | ENCLOSURE FEATURE | INDUSTRIAL |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BTBY | SHAFT END STYLE | |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.9500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.250 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 4.750 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1725.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 208.0 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | RECEPTACLE 1 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 7015-2A | 64731 |
| 54924 | 94833 |
| 7115-1 | 07639 |
| B71-5001-1 | 07639 |