NSN 6105-01-106-4157 · NIIN 011064157 · FSC 6105
NO DASHES 6105011064157
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 0.750 |
| AAJU | OVERALL LENGTH | INCHES 1.125 |
| AAJV | OVERALL WIDTH | INCHES 0.750 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.1400 |
| AJLA | TEETH QUANTITY | 10 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AXCP | WINDING TYPE | PERMANENT MAGNET |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 2 |
| BFMS | FULL TOOTH LENGTH | SINGLE END INCHES NOMINAL 0.3200 |
| BKPH | TORQUE RATING AND TYPE | INCH-OUNCES RUNNING 1.2 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 0.320 |
| CWDY | TEMP RATING | OPERATING CELSIUS -55.0 AND OPERATING CELSIUS 71.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 7000.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 15.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A17 |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 2 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 77600001-4 | 1K426 |
| 24618N-HX-04/D368 | 99932 |
| 77600001-4 | 99932 |