NSN 6105-01-127-6222 · NIIN 011276222 · FSC 6105
NO DASHES 6105011276222
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
41 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 9.562 |
| AAJU | OVERALL LENGTH | INCHES 20.625 |
| AAJV | OVERALL WIDTH | INCHES 11.875 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.688 |
| ABGH | STEP DIAMETER | SINGLE END INCHES MINIMUM 0.874 AND INCHES MAXIMUM 0.875 |
| ABGJ | STEP LENGTH | SINGLE END INCHES NOMINAL 4.0000 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.186 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.094 AND INCHES MAXIMUM 0.110 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.500 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.312 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE AND FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 AND UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS STALLED 10.0 |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | DA-184NY |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 3.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 6.625 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.484 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 7.250 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 AND SINGLE FULL LOAD 3465.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 4.700 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A12 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 0.687 IN. DIA; SHAFT END THIRD STYLE 1.249 IN. DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 3 |