NSN 6105-01-149-8830 · NIIN 011498830 · FSC 6105
NO DASHES 6105011498830
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 15.500 |
| AAJU | OVERALL LENGTH | INCHES 26.190 |
| AAJV | OVERALL WIDTH | INCHES 20.578 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.470 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.380 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.190 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 1.563 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.120 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | SYNCHRONOUS |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS RUNNING 171.0 |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | 286TNCZ |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 7.500 OR HORSEPOWER 25.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 1.563 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 5.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 65.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 9.000 |
| CWFX | ROTOR SPEED RATING IN RPM | LOW NO LOAD 1200.0 OR HIGH NO LOAD 1800.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT FIRST MULTIPLE 33.000 OR SECOND MULTIPLE 12.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 1.6250 IN. DIA; THIRD STYLE 2.124 IN. DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNEF |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 6 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 801631-003 | 50380 |
| 801631-003 | 71956 |
| 500826-2317 | 75477 |
| 801631-003 | 75477 |