NSN 6105-01-150-5855 · NIIN 011505855 · FSC 6105
NO DASHES 6105011505855
In Stock
MOTOR,DIRECT CURRENT
Motors, Electrical
Technical characteristics
20 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 8.590 |
| AAJU | OVERALL LENGTH | INCHES 11.500 |
| AAJV | OVERALL WIDTH | INCHES 5.000 |
| ABSA | SPLINE QUANTITY | 16 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| AXGY | MOUNTING METHOD | PAD |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPH | TORQUE RATING AND TYPE | FOOT-POUNDS RUNNING 4.6 |
| CBBL | FEATURES PROVIDED | VERTICAL MOUNTING POSITION AND FRAME ELECTRICALLY GROUNDED AND INTEGRAL BRAKE AND HORIZONTAL MOUNTING POSITION |
| CBME | CUBIC MEASURE | CUBIC INCHES 493.925 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.375 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 4.125 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 4.125 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A14 |
| FEAT | SPECIAL FEATURES | UNIT OF ISSUE CUBE, IN CUBIC FEET 1599.00 |
| TTQY | TERMINAL TYPE AND QUANTITY | RECEPTACLE 1 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 12292399-2 | 19207 |
| 12292399-5 | 19207 |
| MTB-3001A | 11384 |