NSN 6105-01-151-9154 · NIIN 011519154 · FSC 6105
NO DASHES 6105011519154
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
36 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 6.500 |
| AAJU | OVERALL LENGTH | INCHES 14.380 |
| AAJV | OVERALL WIDTH | INCHES 6.690 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 0.9100 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.108 AND INCHES MAXIMUM 0.123 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.625 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.4400 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CNMM | FRAME SIZE DESIGNATION | P56CZ |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.750 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.625 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 4.320 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 65.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 5.880 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 AND SINGLE FULL LOAD 3450.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 4.800 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 220.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A2 AND SECOND STYLE A9 AND THIRD STYLE A1 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 0.625 IN. DIA; SHAFT END THIRD STYLE 0.810 IN. MIN AND 0.816 IN MAX DIA; KEYWAY EXTNEDS ONTO FIRST STYLE; 0.188 IN. DIA DRILL THRU HOLE ON FIRST STYLE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNF |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 AND WIRE LEAD 3 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 801621-065 | 50380 |
| 801621-065 | 71956 |
| 801621-065 | 75477 |