NSN 6105-01-165-9034 · NIIN 011659034 · FSC 6105
NO DASHES 6105011659034
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
26 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.500 |
| AAJU | OVERALL LENGTH | INCHES 12.500 |
| AAJV | OVERALL WIDTH | INCHES 6.500 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.5000 |
| ABXQ | FLATTED PORTION LENGTH | SINGLE END INCHES NOMINAL 1.7500 |
| AGRB | FLAT DEPTH | SINGLE END INCHES NOMINAL 0.0469 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | END BELL |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED STUD(S) 4 |
| BFMF | COOLING METHOD | NATURAL CONVECTION VENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 0.7500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.750 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.250 |
| CWDY | TEMP RATING | OPERATING CELSIUS 60.0 AND AMBIENT CELSIUS 50.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 5.500 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1725.0 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 115.0 OR LINE TO NEUTRAL HIGH 230.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A5 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | CHANGE TERMINALS TO REVERSE ROTATION OF SHAFT |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SCREW 6 |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| M98648 | 51034 |
| M80780 | 51034 |
| 8-141277-01 | 17037 |