NSN 6105-01-167-9229 · NIIN 011679229 · FSC 6105
NO DASHES 6105011679229
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.500 |
| AAJU | OVERALL LENGTH | INCHES 13.840 |
| AAJV | OVERALL WIDTH | INCHES 6.620 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.188 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.107 AND INCHES MAXIMUM 0.116 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 0.659 AND INCHES MAXIMUM 0.664 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.4400 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | SPRAY TIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FACE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| BTBY | SHAFT END STYLE | |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION AND VERTICAL MOUNTING POSITION |
| CMLP | THREAD QUANTITY PER INCH | 32 |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.2500 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.661 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.970 |
| CWDY | TEMP RATING | OPERATING CELSIUS 65.0 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 5.880 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 3600.0 AND SINGLE FULL LOAD 3450.0 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 20.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | SHAFT END SECOND STYLE 0.745 IN. MIN DIA,0.750 IN. MAX DIA; SHAFT END THIRD STYLE 0.874 IN. DIA |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UN |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 AND WIRE LEAD 3 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 801621-046 | 50380 |
| 500826-2428 | 53555 |
| 801621-046 | 75477 |
| 801621-046 | 71956 |