NSN 6105-01-220-9313 · NIIN 012209313 · FSC 6105
NO DASHES 6105012209313
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 28.500 |
| AAJU | OVERALL LENGTH | INCHES 61.500 |
| AAJV | OVERALL WIDTH | INCHES 41.870 |
| ABRR | KEYWAY WIDTH | IDENTICAL ENDS INCHES NOMINAL 0.875 |
| ABRV | KEYWAY DEPTH | IDENTICAL ENDS INCHES NOMINAL 0.437 |
| ABWV | SHAFT DIAMETER | IDENTICAL ENDS INCHES NOMINAL 3.500 |
| AFYS | KEYWAY LENGTH | IDENTICAL ENDS INCHES NOMINAL 5.000 |
| AKCT | SHAFT ROTATION DIRECTION | IDENTICAL ENDS CLOCKWISE OR COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-15 DEG |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CNMM | FRAME SIZE DESIGNATION | 5808S |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 37.500 OR HORSEPOWER 225.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 6.750 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 8.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 14.500 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 28.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | FIRST MULTIPLE NO LOAD 1800.0 AND SECOND MULTIPLE NO LOAD 300.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 23.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT FIRST MULTIPLE 226.000 OR SECOND MULTIPLE 243.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO LINE SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | IDENTICAL ENDS SINGLE STYLE A9 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 6 AND WIRE LEAD 6 |