NSN 6105-01-245-0990 · NIIN 012450990 · FSC 6105
NO DASHES 6105012450990
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
18 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJU | OVERALL LENGTH | INCHES 29.500 |
| ABRR | KEYWAY WIDTH | IDENTICAL ENDS INCHES MINIMUM 0.375 AND INCHES MAXIMUM 0.377 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| BKPB | CURRENT RATING METHOD | LOAD |
| BTBY | SHAFT END STYLE | |
| CNXS | POWER RATING | INPUT HORSEPOWER 25.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | IDENTICAL ENDS INCHES 3.000 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 7.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 11.000 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 11.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 31.300 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDER LUG 3 |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION |
Cross-references
6 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 2ZYN03155 | 50380 |
| 801631-503 | 50380 |
| 801631-503 | 71956 |
| 2ZYN03155 | 71956 |
| 2ZYN03155VM | 03950 |
| 801631-503VM | 03950 |