NSN 6105-01-301-4501 · NIIN 013014501 · FSC 6105
NO DASHES 6105013014501
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 14.062 |
| AAJV | OVERALL WIDTH | INCHES 15.469 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.250 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 1.748 AND INCHES MAXIMUM 1.750 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES MINIMUM 2.500 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BTBY | SHAFT END STYLE | |
| CNMM | FRAME SIZE DESIGNATION | 256JP |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 20.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 0.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 8.125 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 6.250 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 10.000 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 3510.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 10.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL LOW 230.0 OR LINE TO NEUTRAL HIGH 460.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END FIRST STYLE A3 AND SECOND STYLE A9 AND THIRD STYLE A12 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNIFIED NATIONAL COARSE (UNC) |
| ZZZV | FSC APPLICATION DATA | CENTRIFUGAL PUMP |