NSN 6105-01-331-9019 · NIIN 013319019 · FSC 6105
NO DASHES 6105013319019
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
24 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 13.220 |
| AAJU | OVERALL LENGTH | INCHES 33.880 |
| AAJV | OVERALL WIDTH | INCHES 21.300 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES NOMINAL 0.750 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES NOMINAL 0.750 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 2.875 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 5.620 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF PROTECTED-45 DEG |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| BTBY | SHAFT END STYLE | |
| CNMM | FRAME SIZE DESIGNATION | 405T |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 60.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 7.620 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 7.620 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 13.750 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 16.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 73.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
Cross-references
4 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 26MA894014 | 50380 |
| 706537-213/26MA894014 | 50380 |
| 26MA894014 | 71956 |
| 706537-213/26MA894014 | 71956 |