NSN 6105-01-340-9293 · NIIN 013409293 · FSC 6105
NO DASHES 6105013409293
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 9.000 |
| AAJU | OVERALL LENGTH | INCHES 12.500 |
| AAJV | OVERALL WIDTH | INCHES 12.000 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.250 AND INCHES MAXIMUM 0.252 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES MINIMUM 1.1245 AND INCHES MAXIMUM 1.1250 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 2.500 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | TOTALLY ENCLOSED |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | FAN COOLED |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | MIL-STD-108 |
| BTBY | SHAFT END STYLE | |
| CNMM | FRAME SIZE DESIGNATION | 184T |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 1.500 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 2.750 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 4.485 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 5.500 |
| CWDY | TEMP RATING | AMBIENT CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1170.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 7.500 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 2.500 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| FAAZ | PHASE | INPUT THREE |
| FEAT | SPECIAL FEATURES | MAGNETIC PERMEABILITY SHALL NOT EXCEED 2.0 AFTER FABRICATION |
| FREQ | FREQUENCY IN HERTZ | 60.0 |