NSN 6105-01-469-2131 · NIIN 014692131 · FSC 6105
NO DASHES 6105014692131
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Application: FORCE PROVIDER (USED ON: 4120-01-413-7835)
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJT | OVERALL HEIGHT | INCHES 6.375 |
| AAJU | OVERALL LENGTH | INCHES 11.440 |
| AAJV | OVERALL WIDTH | INCHES 6.375 |
| ABRR | KEYWAY WIDTH | SINGLE END INCHES MINIMUM 0.188 AND INCHES MAXIMUM 0.190 |
| ABRV | KEYWAY DEPTH | SINGLE END INCHES MINIMUM 0.092 AND INCHES MAXIMUM 0.094 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.625 |
| AFYS | KEYWAY LENGTH | SINGLE END INCHES NOMINAL 1.540 |
| AGAV | END ITEM IDENTIFICATION | FORCE PROVIDER (USED ON: 4120-01-413-7835) |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END COUNTERCLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | FUNGUS PROOF AND WEATHERPROOF |
| AXGY | MOUNTING METHOD | BED PLATE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | CLAMP COLLAR 1 |
| BTBY | SHAFT END STYLE | |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 1.750 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 3.188 |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | ITEM NAME: MOTOR,CONDENSER |
| FEAT | SPECIAL FEATURES | THE MOTORS SHALL BE DESIGNED AND TESTED IAW: NATIONAL ELECTRIC MANUFACTURERS ASSOCIATION(NEMA) PUBLICATION NO. MG1 AND OTHER REQUIREMENTS AS SPECIFIED ON THIS DRAWING // THE MOTOR SHALL HAVE 3 WIRES, PHASE A, B & C, 108"+-1, 12 AWG, WITH TERMINAL LUGS, MS25036-156 AND 2 WIRES, P1 & P2, 96"+-1, 18 AWG, WITH TERMINAL LUGS, MS25036-101 // SPECIFICATIONS: A. VOLTAGE(208/230 VOLT +10% -5%) X B. FREQUENCY(50/60 HZ +-5%) X C. PHASE(3) X D. WEIGHT(27 LBS MAX) X E. HORSEPOWER & SPEED(0.75 BRAKE HORSEPOWER AT 1140 RPM, CONTINUOUS RATING) X F. EFFICIENCY(70% MIN AT 0.6 BHP) X G. AIR FLOW OVER MOTOR(1,000 FPM MIN) |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 5 AND SOLDERLESS LUG 5 |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 13230E3512 | 20418 |
| 13230E3512 | 54374 |
| 601995AM853 | 92940 |
| 12031 | 94833 |
| 13230E3512 | 97403 |