NSN 6105-01-502-8831 · NIIN 015028831 · FSC 6105
NO DASHES 6105015028831
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
32 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2B |
| AAJE | THREAD PITCH DIAMETERS | SINGLE END INCHES 0.5600 TO 0.7500 |
| AAJF | THREAD DIRECTION | SINGLE END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 22.560 |
| AAJU | OVERALL LENGTH | INCHES 30.750 |
| AAJV | OVERALL WIDTH | INCHES 22.000 |
| AASA | THREAD LENGTH | SINGLE END INCHES NOMINAL 1.000 |
| ABWV | SHAFT DIAMETER | SINGLE END INCHES NOMINAL 0.500 |
| AKCT | SHAFT ROTATION DIRECTION | SINGLE END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | GENERAL PURPOSE |
| AXCP | WINDING TYPE | COMPOUND WOUND |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | AMBIENT AIR |
| BKPQ | INCLOSURE SPECIFICATION | COMMERCIAL |
| CMLP | THREAD QUANTITY PER INCH | 13 |
| CNXS | POWER RATING | INPUT HORSEPOWER 200.000 |
| CQJX | NOMINAL THREAD SIZE | SINGLE END INCHES 13.000 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SINGLE END INCHES 8.500 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | SINGLE END INCHES 11.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 14.500 |
| CWFQ | MOUNTING FACILITY CIRCLE DIAMETER | INCHES 1.200 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE FULL LOAD 1800.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 8.000 |
| CWGD | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES 11.000 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | SINGLE END SINGLE STYLE A3 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | SINGLE END UNS |
| TTQY | TERMINAL TYPE AND QUANTITY | WIRE LEAD 6 |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 01-0300 REV A | 20019 |
| 01-0300 | 20019 |