NSN 6105-01-100-6473 · NIIN 011006473 · FSC 6105
NO DASHES 6105011006473
In Stock
MOTOR,ALTERNATING CURRENT
Motors, Electrical
Technical characteristics
44 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| AAJT | OVERALL HEIGHT | INCHES 16.500 |
| AAJU | OVERALL LENGTH | INCHES 26.266 |
| AAJV | OVERALL WIDTH | INCHES 17.937 |
| AASA | THREAD LENGTH | IDENTICAL ENDS INCHES NOMINAL 0.750 |
| ABND | TAPER LENGTH | IDENTICAL ENDS INCHES NOMINAL 2.250 |
| ABRR | KEYWAY WIDTH | IDENTICAL ENDS INCHES NOMINAL 0.375 |
| ABRV | KEYWAY DEPTH | IDENTICAL ENDS INCHES NOMINAL 0.188 |
| ABWV | SHAFT DIAMETER | SECOND END INCHES MINIMUM 1.624 AND INCHES MAXIMUM 1.625 |
| ABWV | SHAFT DIAMETER | FIRST END INCHES MINIMUM 0.624 AND INCHES MAXIMUM 0.625 |
| AFYS | KEYWAY LENGTH | IDENTICAL ENDS INCHES NOMINAL 2.250 |
| AKCT | SHAFT ROTATION DIRECTION | SECOND END COUNTERCLOCKWISE |
| AKCT | SHAFT ROTATION DIRECTION | FIRST END CLOCKWISE |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ANPZ | ENCLOSURE FEATURE | WATERTIGHT |
| AXCP | WINDING TYPE | INDUCTION-SQUIRREL CAGE |
| AXGY | MOUNTING METHOD | FIXED BASE |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | UNTHREADED HOLE(S) 4 |
| BFMF | COOLING METHOD | NONVENTILATED |
| BFMR | KEYWAY CENTER TO SHAFT END DISTANCE | IDENTICAL ENDS INCHES NOMINAL 0.470 |
| BKPB | CURRENT RATING METHOD | LOAD |
| BKPQ | INCLOSURE SPECIFICATION | NEMA |
| CBBL | FEATURES PROVIDED | HORIZONTAL MOUNTING POSITION |
| CNMK | WOODRUFF KEY SIZE DESIGNATION | 6 |
| CNMM | FRAME SIZE DESIGNATION | 284UNDZ |
| CNXS | POWER RATING | OUTPUT HORSEPOWER 20.0000 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| CQRR | TAPER | FIRST END PER FOOT IN INCHES 1.250 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | FIRST END INCHES 2.375 |
| CWCS | LENGTH OF SHAFT FROM HOUSING | SECOND END INCHES 4.687 |
| CWDM | SHAFT CENTER TO MOUNTING SURFACE DISTANCE | IDENTICAL ENDS INCHES 7.000 |
| CWDT | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | INCHES 9.500 |
| CWDY | TEMP RATING | OPERATING CELSIUS 50.0 |
| CWFX | ROTOR SPEED RATING IN RPM | SINGLE NO LOAD 1800.0 AND SINGLE FULL LOAD 1645.0 |
| CWFY | NOMINAL CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | INCHES 11.000 |
| CWGL | CURRENT RATING IN AMPS | INPUT SINGLE 25.400 |
| CWGQ | CONNECTION TYPE AND VOLTAGE RATING IN VOLTS | INPUT LINE TO NEUTRAL SINGLE 440.0 |
| CWHZ | SHAFT END CHARACTERISTIC | FIRST END FIRST STYLE A2 AND SECOND STYLE A4 AND THIRD STYLE A9 |
| CWHZ | SHAFT END CHARACTERISTIC | SECOND END SINGLE STYLE A11 |
| FAAZ | PHASE | INPUT THREE |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL COARSE (UNC) |
| TTQY | TERMINAL TYPE AND QUANTITY | SOLDERLESS LUG 3 |