NSN 6110-01-538-3090 · NIIN 015383090 · FSC 6110
NO DASHES 6110015383090
In Stock
CONTROLLER,MOTOR
Electrical Control Equipment
Application: MOTOR
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AQZF | CONTROL TYPE | LOCAL OR REMOTE |
| ANRK | SWITCH FUNCTIONAL POSITIONS | START AND STOP AND RESET AND EMERGENCY RUN |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SIZE 0 A.C. MAGNETIC CONTROLLER |
| FAAZ | PHASE | THREE |
| ACYN | AC VOLTAGE RATING | VOLTS NOMINAL 440.0 |
| ACZB | FREQUENCY RATING | HERTZ NOMINAL 60.0 |
| AFLW | ACTUATION METHOD | MAGNETIC |
| AGAV | END ITEM IDENTIFICATION | MOTOR |
| ANQC | NATIONAL ELECTRICAL MANUFACTURERS ASSOCIATION STANDARDS DESIGN | DESIGNED PER NEMA STD |
| CBBL | FEATURES PROVIDED | ACCESSORY LOCATION EXTERNAL AND CIRCUIT PROTECTION FUSE |
| ABKW | OVERALL HEIGHT | INCHES NOMINAL 14.000 |
| ABMK | OVERALL WIDTH | INCHES NOMINAL 8.000 |
| ANRH | AMP SIZE RATING | 18.0 |
| ABFE | HAZARDOUS LOCATIONS/ENVIRONMENTAL PROTECTION | DRIPPROOF |
| ABHP | OVERALL LENGTH | INCHES NOMINAL 12.000 |
| ANDX | AMBIENT TEMP | CELSIUS 50.0 |
| ANPZ | ENCLOSURE FEATURE | DRIPPROOF |
| FEAT | SPECIAL FEATURES | DISTRIBUTION STATEMENT D;SHOCKPROOF GRADE A CLASS 1 OF MIL-S-901/PPD 802-6335704 PER SUPSHIP LTR N00024-89-C-2000;CRITICAL TECHNOLOGY;EXCEPTION TO MIL-C-2212F-WIRE TERMINALS MIL-T-7928 |
| FREQ | FREQUENCY IN HERTZ | 60.0 |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| ANDE | ACTUATOR VOLTAGE | AC 440.0 |
| ANDG | FUSE CURRENT RATING IN AMPS | 10.0 |
| ANDW | LOAD PROTECTION TYPE | UNDERVOLTAGE AND OVERLOAD |
| ANCN | OPERATING VOLTAGE CHARACTERISTIC | FULL |
| ANCY | HORSEPOWER RATING | 5.000 |
| AGUE | FUSE ACCOMMODATION QUANTITY | 2 |
| AJXE | SIZE DESIGNATOR | 0 |
| AKPS | DUTY CYCLE | CONTINUOUS |
| ALGC | MOUNTING CONFIGURATION | MOUNTING PLANE-BACK;MOUNTING ORIENTATION-RESTRICTED;MOUNTING LOCATION-HULL;4 HOLES 0.468DIA FOR 0.437DIA MOUNTING BOLTS |
Cross-references
3 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| 229B3551G1S2 | 64743 |
| 229B3551 | 63743 |
| 22PB3551 | 02989 |