NSN 1650-00-285-7568 · NIIN 002857568 · FSC 1650
NO DASHES 1650002857568
In Stock
CYLINDER ASSEMBLY,ACTUATING,LINE
Aircraft Hydraulic, Vacuum, and De-icing System Components
Technical characteristics
17 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ATEM | EXTENDED LENGTH | INCHES MINIMUM 11.688 AND INCHES MAXIMUM 11.788 |
| ABMZ | DIAMETER | MOUNTING FACILITY INCHES MINIMUM 0.257 AND INCHES MAXIMUM 0.262 |
| CLMT | PORT STYLE | |
| AJFY | SEAT ANGLE IN DEG | 45.0 |
| BBBW | MOUNTING PROVISION ARRANGEMENT STYLE | |
| BGST | PRESSURE RATING | POUNDS PER SQUARE INCH (PSI) NOMINAL 200.0 |
| ABJH | TEMP RATING | FAHRENHEIT -65.0 AND FAHRENHEIT 275.0 |
| ADAV | OVERALL DIAMETER | INCHES NOMINAL 2.000 |
| CLMR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING PROVISIONS | INCHES MINIMUM 2.875 AND INCHES MAXIMUM 2.885 |
| CLMW | PORT THREAD SERIES DESIGNATOR | UNIFIED NATIONAL JOINT FINE (UNJF) |
| CLMX | PORT THREAD DIAMETER | INCHES NOMINAL 0.875 |
| CLMY | PORT THREAD QUANTITY PER INCH | 14 |
| CLNB | PORT THREAD CLASS | 3B |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY SOURCE CONTROL DRAWING A51H9041-3FSCM 26512 |
| BHMS | MOUNTING PROVISION FOR WHICH DESIGNED | UNTHREADED MOUNTING HOLES |
| AMQZ | COMPRESSED LENGTH | INCHES MINIMUM 10.228 AND INCHES MAXIMUM 10.348 |
| CKSD | DESIGN CHARACTERISTICS | SINGLE ACTING SINGLE CYLINDER |