NSN 5305-01-069-5978 · NIIN 010695978 · FSC 5305
NO DASHES 5305010695978
In Stock
SCREW,EXTERNALLY RELIEVED BODY
Screws
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AASA | THREAD LENGTH | INCHES MINIMUM 0.303 AND INCHES MAXIMUM 0.313 |
| AASB | FASTENER LENGTH | INCHES MINIMUM 1.245 AND INCHES MAXIMUM 1.255 |
| AASK | HEAD STYLE | |
| AASL | HEAD DIAMETER | INCHES MINIMUM 0.495 AND INCHES MAXIMUM 0.505 |
| AASU | HEAD HEIGHT | INCHES MINIMUM 0.546 AND INCHES MAXIMUM 0.578 |
| AAWC | FIRST DIAMETER FROM HEAD | INCHES MINIMUM 0.170 AND INCHES MAXIMUM 0.180 |
| AAWH | DISTANCE FROM LARGEST BEARING SURFACE OF HEAD TO END OF FIRST DIAMETER | INCHES MINIMUM 0.745 AND INCHES MAXIMUM 0.764 |
| ABQZ | INTERNAL DRIVE STYLE | |
| AHYM | NOMINAL THREAD DIAMETER | INCHES 0.250 |
| CMLP | THREAD QUANTITY PER INCH | 28 |
| CRTL | CRITICALITY CODE JUSTIFICATION | ZZZY |
| CSNG | EXTERNALLY RELIEVED BODY DIAMETER QUANTITY | 1 |
| MATT | MATERIAL | OVERALL STEEL COMP 303 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OVERALL ASSN STD SINGLE MATERIAL RESPONSE AST- A582 OR ASSN STD SINGLE MATERIAL RESPONSE AST- A276 |
| SFTT | SURFACE TREATMENT | OVERALL PASSIVATE |
| SPCL | SPECIAL TEST FEATURES | SPECIAL QUALITY CONTROL TESTING |
| STDC | SURFACE TREATMENT DOCUMENT AND CLASSIFICATION | OVERALL FED SPEC SINGLE TREATMENT RESPONSE QQ--35 |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL--23199 |
| THSD | THREAD SERIES DESIGNATOR | UNF |
| ZZZY | REFERENCE NUMBER DIFFERENTIATING CHARACTERISTICS | AS DIFFERENTIATED BY MATERIAL WHICH MUST CONFORM TO SHIPS PARTS CONTROL CENTER SPECIAL QUALITY CONTROL PROVISIONS |