NSN 5945-00-822-1345 · NIIN 008221345 · FSC 5945
NO DASHES 5945008221345
In Stock
RELAY,ELECTROMAGNETIC
Relays and Solenoids
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| APCN | COIL QUANTITY | 2 |
| APNQ | ARC QUENCHING METHOD | AIR |
| ABMK | OVERALL WIDTH | INCHES MAXIMUM 4.453 |
| ADZC | ENVIRONMENTAL PROTECTION | DUSTPROOF |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | SINGLE MOUNTING FACILITY UNTHREADED HOLE(S) 4 |
| BBRG | STORAGE TYPE | GENERAL PURPOSE WAREHOUSE |
| APNP | DUTY TYPE | CONTINUOUS |
| CSXF | OPERATING VOLTAGE RATING AND TYPE AT SPECIFIED TEMP | ALL WINDINGS VOLTS DC 25 DEG CELSIUS 28.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | INDUCTIVE LOAD AMPERES AC 50.0 AND AMPERES DC 50.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | MOTOR LOAD AMPERES AC 50.0 AND AMPERES DC 50.0 |
| CTDL | MAIN CONTACT LOAD CURRENT RATING AT MAXIMUM RATED VOLTAGE | RESISTIVE LOAD AMPERES AC 50.0 AND AMPERES DC 50.0 |
| CWAB | MAIN CONTACT MAXIMUM VOLTAGE RATING IN VOLTS | AC 115.0 AND DC 28.0 |
| MATT | MATERIAL | CASE PLASTIC |
| TEST | TEST DATA DOCUMENT | SPECIFICATION (INCLUDES ENGINEERING TYPE BULLETINS, BROCHURES,ETC., THAT REFLECT SPECIFICATION TYPE DATA IN SPECIFICATION FORMAT; EXCLUDES COMMERCIAL CATALOGS, INDUSTRY DIRECTORIES, AND SIMILAR TRADE PUBLICATIONS, REFLECTING GENERAL TYPE DATA ON CERTAIN ENVIRONMENTAL AND PERFORMANCE REQUIREMENTS AND TEST CONDITIONS THAT ARE SHOWN AS "TYPICAL", "AVERAGE", "NOMINAL", ETC.). 81349--IL-R-6106 |
| TTQY | TERMINAL TYPE AND QUANTITY | ALL FUNCTIONS THREADED STUD 12 |
| ZZZK | SPECIFICATION/STANDARD DATA | GOVERNMENT STANDARD 96906--S24153 |
| CRNG | NONPILE-UP MAIN CONTACT ARRANGEMENT | POLE, SINGLE THROW, NORMALLY OPEN, DOUBLE MAKE, MOMENTARY ACTION 3 |
| ABHP | OVERALL LENGTH | INCHES MAXIMUM 6.000 |
| ABKQ | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO LENGTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 5.125 |
| ABKR | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO WIDTH | SINGLE MOUNTING FACILITY INCHES NOMINAL 2.875 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | SINGLE MOUNTING FACILITY INCHES NOMINAL 0.218 |
| AFJN | FRAGILITY FACTOR | MODERATELY RUGGED |
| AKDX | WINDING QUANTITY | 2 |
| AKSL | PURPOSE FOR WHICH DESIGNED | GENERAL |
| CRXH | TIME DELAY | FIXED OPERATE AND RELEASE TIME SECONDS MAXIMUM 0.01 |
| CBME | CUBIC MEASURE | CUBIC INCHES 88.490 |
| CQYJ | MOUNTING FACILITY PATTERN | SINGLE MOUNTING FACILITY RECTANGULAR |
| ABKW | OVERALL HEIGHT | INCHES MAXIMUM 3.312 |
Supersedes
This item replaces cancelled NIINs 002311857 · 002590645 · 002954101. An older drawing citing one of those numbers resolves here.