NSN 3020-00-615-3289 · NIIN 006153289 · FSC 3020
NO DASHES 3020006153289
In Stock
GEAR,HELICAL
Gears, Pulleys, Sprockets, and Transmission Chain
Technical characteristics
23 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CWPP | PRESSURE ANGLE | DEGREES 14.5000 |
| CWPZ | HELIX ANGLE | DEGREES 39.5167 |
| CWQL | NOMINAL DISTANCE BETWEEN BODY FACE AND PROTRUDING HUB END | SECOND END INCHES 0.625 |
| CQFM | HARDNESS RATING | HUB ROCKWELL C MINIMUM 10.0 AND ROCKWELL C MAXIMUM 19.0 |
| CQFM | HARDNESS RATING | TEETH ROCKWELL C MINIMUM 10.0 AND ROCKWELL C MAXIMUM 19.0 |
| CWQR | NOMINAL DISTANCE BETWEEN BODY FACE AND RECESSED HUB END | FIRST END INCHES 0.535 |
| CWRM | FACE NOMINAL WIDTH | INCHES 0.875 |
| AAQL | BODY STYLE | |
| FEAT | SPECIAL FEATURES | DRILL 8 HOLES 1/8 IN. DIA EAQUALLY SPACED BETWEEN TEETH,7/32 IN. FROM GEAR FACE AA END |
| MATT | MATERIAL | OVERALL STEEL |
| STYL | STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | SECOND END INCHES 1.750 |
| CWRS | BORE NOMINAL DIAMETER | BOTH ENDS INCHES 1.125 |
| CWTR | HUB STYLE DESIGNATOR | |
| CWTX | HUB NOMINAL DIAMETER | FIRST END INCHES 2.000 |
| CWNH | TOOTH FORM | STANDARD |
| CBBL | FEATURES PROVIDED | SINGLE HELIX |
| CWCD | NOMINAL OUTSIDE DIAMETER | INCHES 4.344 |
| AGJS | PITCH DIAMETER | INCHES NOMINAL 4.1475 |
| AJLA | TEETH QUANTITY | 32 |
| ANTP | BORE STYLE | |
| CWNM | TOOTH DIRECTION | LEFT |
| CWFR | NOMINAL OVERALL LENGTH | INCHES 1.356 |
Supersedes
This item replaces cancelled NIIN 003628463. An older drawing citing one of those numbers resolves here.