NSN 2520-00-626-6597 · NIIN 006266597 · FSC 2520
NO DASHES 2520006266597
In Stock
SHAFT,AXLE,AUTOMOTIVE
Vehicular Power Transmission Components
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABHP | OVERALL LENGTH | INCHES MINIMUM 26.531 AND INCHES MAXIMUM 26.656 |
| BNTS | SECOND END FACILITY LOCATION | LOCATED AT SHAFT END |
| ABUJ | THREAD SIZE | 3/8-16 |
| AAUB | HOLE DIAMETER | INCHES MINIMUM 0.438 AND INCHES MAXIMUM 0.440 |
| AETC | METALLIC HARDNESS RATING | MINIMUM ROCKWELL C 25.0 AND MAXIMUM ROCKWELL C 60.0 |
| AHTC | FLANGE OUTSIDE DIAMETER | INCHES MINIMUM 4.745 AND INCHES MAXIMUM 4.750 |
| AJYP | SCREW THREAD SERIES DESIGNATOR | UNIFIED NATIONAL COARSE (UNC) |
| AMGA | SECOND END SPLINE LENGTH | INCHES MINIMUM 1.350 AND INCHES MAXIMUM 1.352 |
| AMGB | SECOND END SPLINE MINOR DIAMETER | INCHES MINIMUM 1.136 AND INCHES MAXIMUM 1.141 |
| BNTM | SECOND END SPLINE TYPE | STRAIGHT |
| FEAT | SPECIAL FEATURES | 1-1/4 IN. DIA OF PORTION OF SHAFT BETWEEN FLANGE AND SPLINE END |
| BNTR | SECOND END FACILITY WIDTH | INCHES NOMINAL 0.250 |
| AXHR | MOUNTING FACILITY TYPE AND QUANTITY | THREADED HOLE(S) 2 AND UNTHREADED HOLE(S) 6 |
| BBCF | SECOND END SPLINE QUANTITY | 10 |
| AMQF | SECOND END TYPE | SPLINED |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| MATT | MATERIAL | STEEL COMP 4063 OR STEEL COMP 1045 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | FED SPEC 1ST MATERIAL RESPONSE QQ-S-624, FS4063-CANCELED OR FED SPEC 2ND MATERIAL RESPONSE QQ-S-633, FS1045-CANCELED |
| ZZZV | FSC APPLICATION DATA | CONTROLLED DIFFERENTIAL |
| BNYT | FLANGE THICKNESS AT MOUNTING HOLE | INCHES NOMINAL 0.438 |
| AMQA | FIRST END TYPE | FLANGED |
| BNYS | FLANGE OVERALL THICKNESS | INCHES NOMINAL 0.812 |