NSN 5935-00-728-9692 · NIIN 007289692 · FSC 5935
NO DASHES 5935007289692
In Stock
CONNECTOR,RECEPTACLE,ELECTRICAL
Connectors, Electrical
Technical characteristics
35 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCL | INCLUDED CONTACT TYPE | SINGLE MATING END ALL CONTACT GROUPINGS ROUND PIN |
| PMLC | PRECIOUS MATERIAL AND LOCATION | GOLD CONTACT SURFACES AND SILVER CONTACT SURFACES |
| PMWT | PRECIOUS MATERIAL AND WEIGHT | GOLD GRAINS, TROY 0.010 AND SILVER GRAINS, TROY 0.010 |
| CXCG | INCLUDED CONTACT QUANTITY | 7 |
| CXCG | INCLUDED CONTACT QUANTITY | 3 |
| CSWM | SHELL SURFACE TREATMENT | CADMIUM AND CHROMATE |
| CSCF | TERMINAL TYPE | SINGLE MATING END ALL CONTACT GROUPINGS SOLDER WELL |
| CSPT | SHELL MATERIAL | ALUMINUM ALLOY |
| AAJD | THREAD CLASS | 2A |
| AAJF | THREAD DIRECTION | RIGHT-HAND |
| AAQL | BODY STYLE | |
| ABHP | OVERALL LENGTH | INCHES MINIMUM 0.750 AND INCHES MAXIMUM 0.780 |
| CQYH | CONTACT SURFACE TREATMENT | SINGLE MATING END ALL CONTACT GROUPINGS GOLD AND SILVER |
| CQZG | INSERT MATERIAL | SINGLE MATING END PLASTIC POLYAMIDE NYLON |
| CQJX | NOMINAL THREAD SIZE | INCHES 1.000 |
| CQTM | TERMINAL LOCATION | SINGLE MATING END ALL CONTACT GROUPINGS BACK |
| CQTZ | CONTACT MATERIAL | SINGLE MATING END ALL CONTACT GROUPINGS COPPER ALLOY |
| AFRP | INSERT POSITION IN DEG | 0.0 |
| AFQK | DISTANCE FROM MOUNTING SHOULDER TO FRONT FACE | INCHES NOMINAL 0.376 |
| AFQR | THREADED DEVICE TYPE | COUPLING FACILITY |
| CMLP | THREAD QUANTITY PER INCH | 6 |
| AFQW | MATING END QUANTITY | 1 |
| AFQX | CONTACT POSITION ARRANGEMENT STYLE | |
| AFQZ | CONTACT REMOVABILITY | SINGLE MATING END ALL CONTACT GROUPINGS NONREMOVABLE |
| AFRT | SHELL TYPE | SOLID |
| AFRV | CONNECTOR LOCKING METHOD | EXTERNALLY THREADED SHELL |
| AFRC | CONTACT MAXIMUM CURRENT RATING IN AMPS | 7.5 |
| AFRN | POLARIZATION METHOD | KEY, MULTIPLE KEY GROOVE |
| ABKW | OVERALL HEIGHT | INCHES MINIMUM 1.110 AND INCHES MAXIMUM 1.140 |
| ABMK | OVERALL WIDTH | INCHES MINIMUM 1.110 AND INCHES MAXIMUM 1.140 |
| AEBV | UNTHREADED MOUNTING HOLE DIAMETER | INCHES MINIMUM 0.115 AND INCHES MAXIMUM 0.125 |
| AEBW | CENTER TO CENTER DISTANCE BETWEEN MOUNTING FACILITIES PARALLEL TO HEIGHT | INCHES MINIMUM 0.838 AND INCHES MAXIMUM 0.848 |
| AEHA | DISTANCE BETWEEN CENTERLINES OF MOUNTING FACILITIES PARALLEL TO BODY WIDTH | INCHES MINIMUM 0.838 AND INCHES MAXIMUM 0.848 |
| PRMT | PRECIOUS MATERIAL | GOLD AND SILVER |
| THSD | THREAD SERIES DESIGNATOR | UNS |
Supersedes
This item replaces cancelled NIIN 006664543. An older drawing citing one of those numbers resolves here.