NSN 3110-01-210-9463 · NIIN 012109463 · FSC 3110
NO DASHES 3110012109463
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
19 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES MINIMUM 0.2030 AND INCHES MAXIMUM 0.2350 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 0.234200 AND INCHES MAXIMUM 0.234250 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 0.406151 AND INCHES MAXIMUM 0.406200 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGZC | LOAD DIRECTION | ANGULAR |
| AKVV | INTERNAL CLEARANCE | INCHES MINIMUM RADIAL 0.0006 AND INCHES MAXIMUM RADIAL 0.0008 |
| CTHQ | BEARING PRELOAD RATING | POUNDS MINIMUM 1.75 AND POUNDS MAXIMUM 2.25 |
| CTHY | CONTACT ANGLE | DEGREES MINIMUM 5.0 AND DEGREES MAXIMUM 25.0 |
| FEAT | SPECIAL FEATURES | CONSISTS OF ONE BEARING WITHOUT A FLANGE AND ONE BEARING WITH A FLANGE,FLANGE 0.4360 IN. MIN AND 0.4370 IN. MAX DIA,0.0220 IN. MIN AND 0.0230 IN. MAX W |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MFR REF SINGLE MATERIAL RESPONSE 639AS3195 |
| MATT | MATERIAL | LUBRICATION GREASE |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED SPEC SINGLE MATERIAL RESPONSE QQ-S-763,COND A |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| SFTT | SURFACE TREATMENT | INNER RING PASSIVATE |
| SFTT | SURFACE TREATMENT | BALL PASSIVATE |
| SFTT | SURFACE TREATMENT | OUTER RING PASSIVATE |