NSN 5905-01-202-4282 · NIIN 012024282 · FSC 5905
NO DASHES 5905012024282
In Stock
RESISTOR NETWORK,FIXED,FILM
Resistor
Technical characteristics
29 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAPE | TEMP COEFFICIENT OF RESISTANCE IN PPM PER DEG CELSIUS | -50.0 TO 50.0 |
| AAPP | ELECTRICAL RESISTANCE | SECOND INTERMEDIATE RESISTANCE VALUE OHMS 194.000 |
| AAPP | ELECTRICAL RESISTANCE | FIRST INTERMEDIATE RESISTANCE VALUE OHMS 50.000 |
| AAPP | ELECTRICAL RESISTANCE | HIGHEST RESISTANCE VALUE KILOHMS 100.000 |
| AAPP | ELECTRICAL RESISTANCE | THIRD INTERMEDIATE RESISTANCE VALUE KILOHMS 4.700 |
| AAPP | ELECTRICAL RESISTANCE | FOURTH INTERMEDIATE RESISTANCE VALUE KILOHMS 99.000 |
| AAPP | ELECTRICAL RESISTANCE | LOWEST RESISTANCE VALUE OHMS 30.000 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.100 TO 0.100 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -0.020 TO 0.020 |
| AAPQ | RESISTANCE TOLERANCE IN PERCENT | -1.000 TO 1.000 |
| AAQF | AMBIENT TEMP IN DEG CELSIUS AT FULL RATED POWER | 25.0 |
| AAQG | AMBIENT TEMP IN DEG CELSIUS AT ZERO PERCENT RATED POWER | 120.0 |
| AAQH | TEMP RANGE OF TEMP COEFFICIENT IN DEG CELSIUS | -55.0 TO 120.0 |
| AAQZ | INCLOSURE METHOD | HERMETICALLY SEALED |
| AARA | TERMINAL QUANTITY | 18 |
| AARG | RELIABILITY INDICATOR | NOT ESTABLISHED |
| ABJT | TERMINAL LENGTH | INCHES MINIMUM 0.205 |
| ADAQ | BODY LENGTH | INCHES NOMINAL 0.992 |
| ADAT | BODY WIDTH | INCHES NOMINAL 0.490 |
| ADAU | BODY HEIGHT | INCHES MAXIMUM 0.200 |
| AEFB | POWER DISSIPATION RATING IN WATTS | LOCATION NOT OTHERWISE SPECIFIED TOTAL NETWORK 0.017 |
| AFWW | TERMINAL WIDTH | INCHES MAXIMUM 0.020 |
| CBME | CUBIC MEASURE | CUBIC INCHES 0.097 |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 2 |
| CQRD | IDENTICAL VALUE RESISTOR QUANTITY | 1 |
| CSCF | TERMINAL TYPE | TAB, SOLDER LUG |
| PKWT | UNPACKAGED UNIT WEIGHT | GRAMS 2.000 |
| STYL | STYLE DESIGNATOR | |
| TEST | TEST DATA DOCUMENT | DRAWING (THIS IS THE BASIC GOVERNING DRAWING, SUCH AS A CONTRACTOR DRAWING, ORIGINAL EQUIPMENT MANUFACTURER DRAWING, ETC.; EXCLUDES ANY SPECIFICATION, STANDARD OR OTHER DOCUMENT THAT MAY BE REFERENCED IN A BASIC GOVERNING DRAWING) 55974-6405262 |