NSN 3130-01-022-2104 · NIIN 010222104 · FSC 3130
NO DASHES 3130010222104
In Stock
BEARING UNIT,BALL
Bearings, Mounted
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABKG | BOLT CIRCLE DIAMETER | INCHES NOMINAL 3.0000 |
| ABKU | FLANGE THICKNESS | INCHES NOMINAL 0.4219 |
| ABXV | BORE DIAMETER | INCHES NOMINAL 1.0000 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES NOMINAL 3.7500 |
| AFWB | HOUSING DIAMETER | INCHES NOMINAL 2.7188 |
| AFWD | HOUSING LENGTH | INCHES NOMINAL 0.7812 |
| AGKL | LUBRICATION FITTING TYPE | HYDRAULIC |
| AGUX | MOUNTING HOLE WIDTH | INCHES MINIMUM 0.3438 |
| AGYX | ROLLING ELEMENT GROOVE QUANTITY | 1 |
| AGZA | ALIGNMENT TYPE | SELF-ALIGNING |
| AGZH | INTERNAL FIT-UP DESIGNATION | STANDARD |
| AHZC | ASSEMBLY OVERALL LENGTH | INCHES NOMINAL 1.3438 |
| AKRF | SEAL TYPE | CONTACT |
| AMCL | BLOCK TYPE | FIXED |
| ANJS | SHAFT END TYPE | OPEN |
| ANKF | SEAL LOCATION | BOTH ENDS |
| ANKH | COLLAR LOCATION | ONE END |
| ANKK | LOAD CAPABILITY TYPE | RADIAL AND THRUST |
| CBBL | FEATURES PROVIDED | GROUND ROLLING ELEMENT GROOVE |
| CWGR | LUBRICATION FITTING ANGLE FROM HORIZONTAL CENTERLINE | DEGREES NOMINAL 45.0 |
| CWGY | ROTATING ELEMENT LOCKING METHOD | SETSCREW LOCKING COLLAR |
| CWJW | MOUNTING HOLE TYPE | SQUARE |
| LBMA | LUBRICATION MATERIAL | GREASE |
| MATT | MATERIAL | HOUSING IRON MALLEABLE |
| MATT | MATERIAL | BEARING STEEL COMP E52100 |
| MATT | MATERIAL | SEAL RUBBER SYNTHETIC AND STEEL |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BEARING ASSN STD SINGLE MATERIAL RESPONSE SAE |
| STYL | STYLE DESIGNATOR |