NSN 3110-01-095-0426 · NIIN 010950426 · FSC 3110
NO DASHES 3110010950426
In Stock
BEARING,BALL,DUPLEX
Bearings, Antifriction, Unmounted
Technical characteristics
22 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ABMK | OVERALL WIDTH | INCHES NOMINAL 0.5624 |
| ABXV | BORE DIAMETER | INCHES MINIMUM 1.3122 AND INCHES MAXIMUM 1.3125 |
| ADGA | OVERALL OUTSIDE DIAMETER | INCHES MINIMUM 1.7496 AND INCHES MAXIMUM 1.7500 |
| AGYE | SURFACE FINISH | GROUND |
| AGYF | RETAINER FABRICATION METHOD | MACHINED |
| AGYJ | SEAL QUANTITY | 2 |
| AGYW | BEARING SEAL TYPE | CONTACT |
| AGZC | LOAD DIRECTION | ANGULAR |
| CTFZ | STANDARD TOLERANCE DESIGNATION | ABEC NO. 7T |
| CTHQ | BEARING PRELOAD RATING | POUNDS NOMINAL 40.0 |
| FEAT | SPECIAL FEATURES | FACE TO FACE DUPLEX MOUNTED W/1 SHIED ON EACH BEARING |
| LMDC | LUBRICATION MATERIAL DOCUMENT AND CLASSIFICATION | MIL SPEC SINGLE MATERIAL RESPONSE -IL-G-23827 |
| MATT | MATERIAL | RETAINER PLASTIC PHENOLIC |
| MATT | MATERIAL | LUBRICATION GREASE |
| MATT | MATERIAL | OUTER RING STEEL COMP 440C |
| MATT | MATERIAL | INNER RING STEEL COMP 440C |
| MATT | MATERIAL | SEAL RUBBER BUTADIENE-ACRYLONITRILE CLASS NBR |
| MATT | MATERIAL | BALL STEEL COMP 440C |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | BALL FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | OUTER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| MDCL | MATERIAL DOCUMENT AND CLASSIFICATION | INNER RING FED STD SINGLE MATERIAL RESPONSE 66 |
| STYL | STYLE DESIGNATOR |