NSN 4720-00-541-2402 · NIIN 005412402 · FSC 4720
NO DASHES 4720005412402
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
31 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| SCMP | ITEM STRUCTURAL COMPOSITION | FIRST LAYER BRAIDED COTTON CORD |
| PRPY | PROPRIETARY CHARACTERISTICS | PACS |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 76.500 |
| CTCJ | FLANGE STYLE | |
| CQQF | OPERATING PRESSURE | SINGLE RESPONSE POUNDS PER SQUARE INCH (PSI) MAXIMUM 120 |
| CRDW | HYDROSTATIC TEST PRESSURE | POUNDS PER SQUARE INCH 240.0 |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | FUEL RESISTANT AND HYDRAULIC SOLUTION RESISTANT AND SOLVENT RESISTANT AND WATER RESISTANT |
| CBBL | FEATURES PROVIDED | ELECTROSTATIC DISCHARGE CAPABILITY AND REUSABLE END FITTINGS |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 720.0 |
| AKUT | END FLANGE CONSTRUCTION | FIRST END SOLID |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AWLS | CONNECTION TYPE | FIRST END RAISED FACE FLANGE |
| AHNC | CONNECTION STYLE | |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 11.000 |
| ADJS | EXTERIOR COLOR | BLACK |
| AJEE | RAISED FACE DIAMETER | FIRST END INCHES NOMINAL 2.125 |
| ADUY | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG WIDTH | FIRST END INCHES NOMINAL 1.810 |
| ADUZ | CENTER TO CENTER DISTANCE BETWEEN BOLT HOLES ALONG LENGTH | FIRST END INCHES NOMINAL 1.810 |
| AECS | BOLT HOLE QUANTITY | 4 |
| AHNX | BOLT HOLE DIAMETER | FIRST END INCHES NOMINAL 0.270 |
| AJED | RAISED FACE HEIGHT | FIRST END INCHES NOMINAL 0.020 |
| AFQN | FLANGE LENGTH | FIRST END INCHES NOMINAL 2.380 |
| AGFF | FLANGE WIDTH | FIRST END INCHES NOMINAL 2.380 |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 1.380 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -40.0 AND FAHRENHEIT 300.0 |
| ABKU | FLANGE THICKNESS | FIRST END INCHES NOMINAL 0.300 |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 1.670 |
| SCMP | ITEM STRUCTURAL COMPOSITION | OUTER LAYER RUBBER IMPREGNATED BRAIDED COTTON CORD |
| SCMP | ITEM STRUCTURAL COMPOSITION | SECOND LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |