NSN 4720-00-869-1787 · NIIN 008691787 · FSC 4720
NO DASHES 4720008691787
In Stock
HOSE ASSEMBLY,NONMETALLIC
Hose and Flexible Tubing
Technical characteristics
28 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| AAJD | THREAD CLASS | 3B |
| AAJF | THREAD DIRECTION | SECOND END RIGHT-HAND |
| AWLS | CONNECTION TYPE | SECOND END THREADED INTERNAL TUBE |
| CBBL | FEATURES PROVIDED | REUSABLE END FITTINGS |
| CRFY | FLOW ANGLE | SECOND END DEGREES 90.0 |
| CQJX | NOMINAL THREAD SIZE | FIRST END INCHES 0.750 |
| AWLS | CONNECTION TYPE | FIRST END THREADED INTERNAL TUBE |
| CQRB | SEAT ANGLE | SECOND END DEGREES 37.0 |
| AAJF | THREAD DIRECTION | FIRST END RIGHT-HAND |
| CQQF | OPERATING PRESSURE | LOCATION NOT OTHERWISE SPECIFIED POUNDS PER SQUARE INCH (PSI) MAXIMUM 1500.0 |
| CQRB | SEAT ANGLE | FIRST END DEGREES 37.0 |
| CRWL | INSIDE SURFACE CONDITION | SMOOTH |
| CRXX | MEASURING METHOD AND LENGTH | INCHES NOMINAL OVERALL 25.000 |
| FEAT | SPECIAL FEATURES | U/OF-4 PHANTOM II |
| SCMP | ITEM STRUCTURAL COMPOSITION | THIRD LAYER BRAIDED CORROSION RESISTANT STEEL WIRE |
| THSD | THREAD SERIES DESIGNATOR | FIRST END UNIFIED NATIONAL JOINT FINE (UNJF) |
| THSD | THREAD SERIES DESIGNATOR | SECOND END UNIFIED NATIONAL JOINT FINE (UNJF) |
| ABKV | OUTSIDE DIAMETER | INCHES NOMINAL 0.562 |
| ACKH | MINIMUM INSIDE BENDING RADIUS | INCHES 4.620 |
| AHNC | CONNECTION STYLE | |
| AARX | INSIDE DIAMETER | INCHES NOMINAL 0.406 |
| ABJH | TEMP RATING | SINGLE RESPONSE FAHRENHEIT -65.0 AND FAHRENHEIT 450.0 |
| CQBD | BURST TEST PRESSURE | POUNDS PER SQUARE INCH 8000.0 |
| AKUU | END CONNECTION DESIGN | FIRST END STRAIGHT |
| AKUU | END CONNECTION DESIGN | SECOND END ELBOW |
| CRJM | OUTER COVERING ENVIRONMENTAL PROTECTION | ALCOHOL RESISTANT AND FUEL RESISTANT AND OIL RESISTANT |
| AAGR | CROSS-SECTIONAL SHAPE STYLE | |
| CQJX | NOMINAL THREAD SIZE | SECOND END INCHES 0.750 |