NSN 6515-00-935-6592 · NIIN 009356592 · FSC 6515
NO DASHES 6515009356592
In Stock
SPLINT,ARM
Medical and Surgical Instruments, Equipment, and Supplies
Technical characteristics
5 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPLINT ARM ADULT DBL WALL PNEUMATIC ZIPPER CLOSURE NONADJ PLAS |
| FEAT | SPECIAL FEATURES | PNEUMATIC; ZIPPER CLOSURE; DOUBLE WALL; W/FULL LENGTH SLIDE FASTENER AND VALVE PERMITTING INFLATION BY MOUTH; OUTER WALL SHALL BE 12 GAGE (0.012 INCH NOM) AND INNER WALL 8 GAGE (0.008 INCH NOM) MATERIAL; THE VALVE SHALL BE A SCREW TYPE FOR OPENING AND CLOSING AIR INFLATION PASSAGE W/KNURLED EXTERNAL MEMBER TO WHICH A PLASTIC MOUTHPIECE IS ASSEMBLED; THE SLIDE FASTENER SHALL BE A POLYESTER COIL W/DIE CAST ZINC SLIDE AND END STOPS; INNER AND OUTER PLASTIC SHEETS,SLIDE FASTENER TAPES AND VALVE ASSEMBLY SHAALL BE HEAT SEALED TO MAKE AN AIR-TIGHT END ITEM; 5-3/4 IN. (14.1 CM) WIDE DISTAL END; 9-1/2 IN. (24.13 CM) WIDE PROXIMAL END; 32 IN. (81.28 CM) OVERALL LENGTH; EACH SPLINT SHALL BE SEALED INTO AN AIR-TIGHT PLASTIC BAG; USE IN AIRCRAFT REQUIRES MONITORING THE SPLINT PRESSURE TO PREVENT NEUROVASCULAR INJURY; THE ANEROID PRESSURE GAGE OF A STANDARD SPHYGMOMANOMETER SHOULD BE AVAILABLE FOR MONITORING THE SPLINT PRESSURE DURING ASCENT AND DESCENT |
| MATT | MATERIAL | BODY PLASTIC |
| ALBY | USAGE DESIGN | WHOLE ARM |
| ALJP | SIZE DESIGNATION | ADULT |
Cross-references
2 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
Supersedes
This item replaces cancelled NIIN 010108762. An older drawing citing one of those numbers resolves here.