NSN 6515-00-935-6593 · NIIN 009356593 · FSC 6515
NO DASHES 6515009356593
In Stock
SPLINT,LEG
Medical and Surgical Instruments, Equipment, and Supplies
Technical characteristics
5 rows
Straight from the federal item record. Entries the record leaves empty are shown empty — nothing is filled in on its behalf.
| MRC | Requirement | Value |
|---|---|---|
| ALBY | USAGE DESIGN | WHOLE LEG |
| CXCY | PART NAME ASSIGNED BY CONTROLLING AGENCY | SPLINT LEG ADULT DBL-WALL PNEUMATIC SLIDE FASTENER NONADJ PLAS |
| ALJP | SIZE DESIGNATION | ADULT |
| FEAT | SPECIAL FEATURES | PNEUMATIC;DOUBLE WALL;OPEN-TOE;W/FULL LENGTH SLIDE FASTENER AND VALVE PERMITTING INFLATION BY MOUTH;12 GAGE OUTER WALL;8 GAGE INNER WALL;SCREW TYPE VALVE FOR OPENING AND CLOSING AIR INFLATION PASSAGE W/KNURLED EXTERNAL MEMBER TO WHICH A PLASTIC MOUTHPIECE IS ASSEMBLED;SLIDE FASTENER MADE OF ESTER COIL W/DIE CAST ZINC SLIDE AND END STOPS;INNER AND OUTER PLASTIC SHEETS,SLIDE FASTENER TAPES AND VALVE ASSEMBLY HEAT SEALED TO MAKE ITEM;37-1/2 IN.L FROM HEEL TO TOP OF SLINT,13 IN. W AT TOP OF SPLINT, 9-1/2 IN.W AT FOOT;USE IN AIRCRAFT REQUIRES MONITORING SPLINT PRESSURE;KEEP ONLY ENOUGH PRESSURE TO RIGIDLY SUPPORT LIMB; MODERATE PRESSURE W/THUMB WILL CAUSE ONLY A SLIGHT DENT WHEN PRESSED AGAINST SPLINT; SPLINTS AIR TRANSPORTED SHOULD BE KEPT INFLATED BELOW 50 MM HG. |
| MATT | MATERIAL | BODY PLASTIC |
Cross-references
5 manufacturer part numbers on file for this NSN — each shown against the CAGE code it belongs to.
| Manufacturer part number | CAGE |
|---|---|
| SI718 | 1S417 |
| S504 | 62842 |
| DEFSUP-0001 | 6T584 |
| 705 | 0AG09 |
| 940060 | 0R2Z5 |